TECHNET Archives

November 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Rudy Sedlak <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 3 Nov 1999 18:24:47 EST
Content-Type:
text/plain
Parts/Attachments:
text/plain (35 lines)
Vee haf vays off dealing with dies problem, jah?

Dr.

You are baking the boards after applying a corrosive mixture like flux to the
surface?  Jah?

If you were NOT getting corrosion, I would be surprised.

It is my guess, that if the corrosion is not on the board before this step,
it would be afterwards, especially if the baking were being done "casually",
and not under strict minimum time and temperature guidelines.

Check to see if you have corrosion before soldering, perhaps by running a
bare panel down the solder line, with no flux and/or baking?

Good luck.

Rudy Sedlak
RD Chemical Company

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2