TECHNET Archives

November 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: FAB: UL and/or Vendor Logos
From:
Ed Cosper <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 29 Nov 1999 17:28:41 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (58 lines) 
There is not typical size.. I suspect it is at your discretion provided it
remains legible .

Ed C.


----- Original Message -----
From: Jack Olson <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, November 29, 1999 4:22 PM
Subject: [TN] FAB: UL and/or Vendor Logos


> Can anyone with fab CAM expertise tell me if there is a typical SIZE for
the
> vendor logo?
> Is there a maximum size?
>
> We prefer them in copper on the back of the board, but sometimes we need
to
> make a little relief in a plane (cut out a rectangle) for the logo.
>
> The question is: How big should the relief or rectangle be?
>
> Thanks in advance,
> Jack
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2