IPC-9191 "General Guidelines for Implementation of Statistical Process
Control (SPC) should be released very soon by IPC. The auxiliary documents
of IPC-9192, IPC-9193, IPC-9194, and IPC-9199 are being worked on. You may
be able to obtain draft copies from IPC. This is basically what you are
looking for. When you choose someone for in-house training, pick someone who
is familar with ISO 11462-1. This standard has been adopted as the
foundation of IPC-9191.
Al Cash
-----Original Message-----
From: Ed Cosper [mailto:[log in to unmask]]
Sent: Wednesday, November 24, 1999 7:23 AM
To: [log in to unmask]
Subject: Re: [TN] SPC Information
Jeff,
Contact me offline... [log in to unmask] Perhaps I can help.
Ed Cosper
----- Original Message -----
From: Isaac Jeff <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, November 24, 1999 2:03 AM
Subject: [TN] SPC Information
> Dear all
>
> I would like to setup a meaningful SPC / SQC system in my production and
test
> sections. I have searched the archives and have obtained useful
information and
> links to websites offering software to setup / control / monitor an SPC
system.
> I don't want to go on a course which will explain how to do this if the
course
> tackles all industries. I would like to go on a course which relates
> specifically to Electronic Manufacturing as I believe this would show me
exactly
> what data I can be capturing and how to capture it which would be helpful
to
> control and monitor the assembly process.
>
> Does anyone know of an SPC course that relates specifically to electronic
> manufacturing in Sydney / Australia ?
>
> or better
>
> Does anyone know of some company / person in Sydney / Australia who would
come
> to my company and explain the absolute basics of setting up a meaningful
SPC /
> SQC system ? For a fee of course.
>
> As you can tell this is very new to me, but everyone needs to start
somewhere.
> To date one of the ways I've been tackling quality problems is by getting
> feedback from the testing area as to the reasons for quality problems /
> failures. This then highlights a number of factors in the process which I
can
> address to prevent these faults (less than 0.04 dppm) from re-occuring. We
also
> have inspection points along the way ie. after screenprinting, after
pick&place,
> after reflow but I am at a loss to what data I can be capturing, and how
to put
> this data into the various formulas out there to calculate Cpk, Cp, Ppm
etc. I
> have been doing a lot of reading, but am in need of personal tuition.
>
> Many thanks in advance for the help.
>
> Regards,
> Jeff Isaac
>
> Hypertec Australia
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
