Jon,

Can you direct me to the website that has information on this tool?

Thank you,

Kathie Lucas
L-3 Communications
640 North 2200 West
Salt Lake City, UT  84116
[log in to unmask]

> -----Original Message-----
> From: Jon Moore [SMTP:[log in to unmask]]
> Sent: Tuesday, November 09, 1999 2:21 PM
> To:   [log in to unmask]
> Subject:      Re: [TN] Cutting through an inner trace
>
> In a message dated 11/4/99 7:08:37 AM US Eastern Standard Time,
> [log in to unmask] writes:
>
> > Hi Matt
> >
> >  Have had excellent success using Dremel tools and some of their
> truncated
> >  cone shape carbide cutters.  Most skilled rework/repair operators can
> pick
> >  up this type operation with a minimum of practice.
>
> The rotary tool that comes with the Pace PRC-2000 repair equipment
> actually
> has a ground lead that electrically attaches to the trace you want to
> drill
> down to, and as soon as you touch that trace the motor stops within the
> next
> 4 revolutions, making it impossible to drill all the way through.  It is
> very
> useful.
>
> Jon Moore
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################