Good Morning
Again I am looking for some help. We visited 4 different board shops last
week and got some good feedback on our solderability issues.
One of the things they stated is if the thickness of HASL drops below 50
micron/ microinches I am not sure which, it would affect solderabilty.
I have looked thru the IPC specs on Boards and solderability and have found
nothing on the min and max thickness for the solder. We use 63/37 solder
surface on our boards.
We are thinking of putting a min thickness spec on our B/P's is this
feasible or not. Also what is the standard that relates to this or the
industry standard that is used?
Thanks in advance
Tom Oliver
QC Supervisor
Eagle Comtronics
[log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################