I found  a couple of places that make "micro blasting" equipment, here are
the links.

http://www.sswt.com
http://www.lortone.com/sandblast.html
http://www.comcoinc.com/page3.htm

Thomas DeSmit
EDA Librarian/Sr. Engineering Tech.
IFR Americas, INC.

The opinions expressed are my own, and do not necessarily reflect those of
my employer.

> -----Original Message-----
> From: TechNet E-Mail Forum. Matt Cirineo <[log in to unmask]>
> [mailto:[log in to unmask]]
> Sent: Wednesday, November 03, 1999 2:28 PM
> To: [log in to unmask]
> Subject: [TN] Cutting through an inner trace
>
>
> Other than drilling, has anyone used an alternative method of cutting
> through an inner layer trace?  I'm thinking of methods such as
> laser, water
> cutting,...
>
> Your comments and suggestions would be greatly appreciated.
> Matthew Cirineo
> Operations Engineering
> Primex Aerospace Company
> phone: 425-885-5010 x4855
> fax: 425-895-4310
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################