Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 9 Nov 1999 10:46:25 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi John,
We use the stencil thickness as the lower control limit. Upper limit is set to stencilthickness + 100 micron.
If the variation of boards is limited (topography of the board is what matters here) you should be able to set your limits a little tighter, but even for high-quality products that isn't really necessary.
I like the LSM very much. We have it here for about five years, and never had a problem with it.
Daan Terstegge
Unclassified mail
>>> John Harris <[log in to unmask]> 11/08 11:14 pm >>>
Guys,
We have just got ourselves a nice LSM Solder paste height unit. I was
wondering what typical control limits you guys have in relation to the
stencil thickness. Some tests that were done here some years ago had the
lower control limit as [stencil thickness - 15%]. Would that be reasonable?
What about the upper limit?
Thanks
John Harris
Process Engineer
AEMS Pty Ltd
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|