Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 4 Nov 1999 15:30:31 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I am planning on bonding Polyimide PWB's to centerline heatsinks using an
Epoxy B-stage material. Does anyone have experience with the process used
to do this. I am interested in Temperature, pressure, time information. I
am planing on using an AlliedSignal product called A11.
The purpose of this bondline is to constrain the PWB during temperature
cycling. I am looking to get a CTE of less than 10 over the temperature of
-55 to 125 C
Any information would be helpful
Thanks,
Michael Becker
Mechanical Engineer
Raytheon Systems Company
Baltimore, Maryland
410-583-4036
[log in to unmask]
Instant Messanger: mbecker999
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|