Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 4 Nov 1999 06:05:46 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Matt
Have had excellent success using Dremel tools and some of their truncated
cone shape carbide cutters. Most skilled rework/repair operators can pick
up this type operation with a minimum of practice. I recommend using some
sort of template or 1:1 visual aid to avoid cutting the wrong trace on
densly populated boards.
Using a small 2 flute endmill and a milling set-up also works well, space
permitting.
Regards - Kelly
-----Original Message-----
From: Matt Cirineo <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, November 03, 1999 4:31 PM
Subject: [TN] Cutting through an inner trace
>Other than drilling, has anyone used an alternative method of cutting
>through an inner layer trace? I'm thinking of methods such as laser, water
>cutting,...
>
>Your comments and suggestions would be greatly appreciated.
>Matthew Cirineo
>Operations Engineering
>Primex Aerospace Company
>phone: 425-885-5010 x4855
>fax: 425-895-4310
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|