Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 9 Nov 1999 15:41:40 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Jon,
Can you direct me to the website that has information on this tool?
Thank you,
Kathie Lucas
L-3 Communications
640 North 2200 West
Salt Lake City, UT 84116
[log in to unmask]
> -----Original Message-----
> From: Jon Moore [SMTP:[log in to unmask]]
> Sent: Tuesday, November 09, 1999 2:21 PM
> To: [log in to unmask]
> Subject: Re: [TN] Cutting through an inner trace
>
> In a message dated 11/4/99 7:08:37 AM US Eastern Standard Time,
> [log in to unmask] writes:
>
> > Hi Matt
> >
> > Have had excellent success using Dremel tools and some of their
> truncated
> > cone shape carbide cutters. Most skilled rework/repair operators can
> pick
> > up this type operation with a minimum of practice.
>
> The rotary tool that comes with the Pace PRC-2000 repair equipment
> actually
> has a ground lead that electrically attaches to the trace you want to
> drill
> down to, and as soon as you touch that trace the motor stops within the
> next
> 4 revolutions, making it impossible to drill all the way through. It is
> very
> useful.
>
> Jon Moore
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|