Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 26 Oct 1999 09:41:43 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I cannot help but joined in. If you refer to MIL-C-28809, it mentioned that the total
maximum repairs permitted per board is :
Board size : Max. number allowed
<20 sq.inch 6
<50 sq.inch 12
<100 sq.inch 18
100 < 24
Hope this is what have been all about.
Regards.
Timothy Reeves wrote:
> The original question had nothing to do with wire wrapping.
> And mine is not a question either...but a comment: I looked in IPC-7711 and
> IPC-7721 and found nothing about how many repairs/modifications are allowed.
> Only HOW to do them (for jumper wires see IPC-7721 Procedure 4.2.4). I think
> it would be up to a customer to decide how many should be allowed.
> MIL-PRF-55110 allows none.
>
> > ----------
> > From: Franklin
> > Sent: Friday, October 8, 1999 12:46 PM
> > Subject: Maximum Jumper Wires--Of Course
> >
> > Okay, I suppose I need to be more clear on things.
> >
> > I think it was Ken Patel that asked about the jumper wires.
> >
> > I simply commented on Joans statement that it was referenced in IPC A 600.
> >
> > Sorry, but hey, thanks for all the data people.
> >
> > Franklin
> >
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|