Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 6 Oct 1999 08:51:15 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello all,
I am experiencing some missing email and am trying to determine if the
problem is at my end or somewhere else.
How many emails with the above subject (minus the '- Sanity check') have you
received since the original subject was sent out at 10/5/99 3:29PM? That is
the Sent Time I show for the first one I received. I have only received two
others since that one and they both are like the one attached here, from Jon
Moore in replying to someone else's question. However I never saw the
'someone else's question' come through.
Please reply to me off line so I can begin to find the problem. By the way I
have suspected this recently but now I can actually pinpoint some
particulars.
Thanks for your help in advance.
Richard Hamilton
Clemar Mfg. / Rain Bird
[log in to unmask]
> -----Original Message-----
> From: Jon Moore [SMTP:[log in to unmask]]
> Sent: Wednesday, October 06, 1999 7:44 AM
> To: [log in to unmask]
> Subject: Re: [TN] Temporary Solder Mask
>
> In a message dated 10/6/99 8:04:50 AM US Eastern Standard Time,
> [log in to unmask] writes:
> >>SNIP<<...
> > In addition to what you are looking
> > for, we are looking for a fast cure solder masking that is water
> > soluble. (Continuous flow is difficult to do if you must wait ten
> > minutes for the masking to cure.)
> ...>>SNIP<<
>
> Ryan,
> Here is how I dealt with that issue, but it really only works if you
> have bottom side SMD's going through your wave process. I put the temp
> solder mask on right after placing the bottom side SMD's, but before the
> cure
> oven for the SM adhesive. That way the oven cured the adhesive and dried
> the
> mask thoroughly before the wave operation.
>
> Jon Moore
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|