Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 6 Oct 1999 14:06:15 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Jim,
do you have components on the side that needs to have the solder mask added to it? Can your components withstand 300*F for one hour required to cure the mask? If not, you may want to consider a UV cureable solder mask for this rework. If you have no components on the side that needs the rework, you might be able to make a small fixture and screen it on, all you would need to do would be to insure that the assembly is stable before screening. Otherwise, do you have anyone there with a steady hand??
Ron
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|