Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Sat, 9 Oct 1999 10:57:45 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Jack
I have some question about the flash or immersion good.
As I my mind, The flash gold is electrolyic plated. The immersion gold is just
coat by chemically reaction. Is that right?
So ENIG is refer to immersion gold.... E refer to electroless.
More, can u point out the pros or cons between them.
Best Regard,
Nicholas Lai
10/9/99
Eric Yakobson <[log in to unmask]> on 99/10/09 08:55:10 AM
Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond to
[log in to unmask]
To: [log in to unmask]
cc: (bcc: Nicholas LAI/CS/Topsearch)
Subject: Re: [TN] Flash Gold vs. ???
Hi Jack,
Unfortunately plating terminology is not much less confusing then the one for
Solder Float-Stress-Shock Testing.
The term soft gold refers to high purity 24K (usually electroplated) gold, as
opposed to hard gold, which contains Ni and/or Co. Terms flash or strike
usually refer to thin deposits. Strike traditionally is applied as a thin
electrolytic deposit out of diluted (low metal concentration) bath -- for better
throw and coverage -- in order to improve adhesion of the substrate to
subsequent electrolytic deposit, whereas flash is be applied as a thin final
coating, e.g. to impart a certain color to the substrate (jewelry).
Immersion gold, as you rightly pointed out , is inherently self-limiting (<10-12
microinches -- not mils!) and high-purity, therefore it technically can be
called "soft" and "flash". If it is "any thickness you want" -- it's not
immersion and it can't be called "flash". It's either electroless (more precise
term is autocatalytic, since technically immersion also belongs to electroless
class), or deep (heavy) electrolytic.
Hope I didn't confuse you even more.
Eric Yakobson
Alpha PC Fab
Jack Olson <[log in to unmask]> on 10/07/99 08:34:03 AM
To: [log in to unmask]
cc: (bcc: Eric Yakobson/AlphaPCFabUS/Cookson)
Subject: [TN] Flash Gold vs. ???
Do some manufacturers use the soft electroless gold (deep bath?) in place of
immersion gold? Is there some place I could learn what the difference is?
None of my books address it, and I always thought flash gold was a
self-limiting process that wouldn't go over 10 mils, but now we are hearing
it can be any thickness we want. True?
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|