------- Forwarded Message Follows -------
From: Self <RobertsK.Eng.Perth.UK>
To: [log in to unmask]
Subject: Topside wetting on Gold PCBs
Reply-to: [log in to unmask]
Date: Thu, 7 Oct 1999 17:13:56 GMT
Hi,
I am currently processing an immersion gold finished card through
bottom side glue, topside reflow then wave solder.
The problem I am seeing is solder is not flowing through to the
topside leaving many PTH parts with very little hole fill. The wave
solder is an Electrovert Ultrapak with econo spray fluxer twin
preheats and dual wave.
I have tried running the boards through an older machine which has a
foam fluxer and this gave improved results but still not perfect.
Has anyone seen a similar condition and what was the solution.
Ken Robertson
Telspec Scotland Ltd.
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################