TECHNET Archives

September 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ryan Grant <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 27 Sep 1999 07:21:30 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (83 lines)
Parvez,
        You're absolutely right.  Re-flow parameters are certainly critical,
especially with sensitive paste.  As I mentioned (not very well),
improper re-flow profile parameters can dry out the flux, or worse, burn
it.

        Recently, at SMTA, Charles Bradshaw presented an interesting paper
titled "Thermogravimetric Analysis Predictions of Reflow Profile of
Solder Pastes" that is basically a scientific method of determining the
reflow profile for any specific flux vehicle.  That paper goes into
better specifics as to what will happen to the flux for incorrect reflow
profiles.

        In addition, I neglected to mention that voids in BGA's happen only
when paste is used.  If only flux is used, the tip of the ball can begin
wetting the pad from the inside out to the edge of the pad, thus driving
the flux in front of the molten solder.


                        Thanks

Ryan Grant
Process Development Engineer
MCMS
(208) 898-1145
FAX (208) 898-2789
[log in to unmask]

>-----Original Message-----
>From:  Parvez M.S. Patel [SMTP:[log in to unmask]]
>Sent:  Monday, September 27, 1999 6:58 AM
>To:    [log in to unmask]
>Subject:       Re: [TN] BGA voids
>
>Ryan
>that was really good reply.
>Dont u think reflow profile parameters are also critical?
>
>
>
>--
>PARVEZ M.S. PATEL                             ADDRESS:
>GRADUATE STUDENT,                             APT.#2, 182 Westend Avenue,
>SYSTEMS SCIENCE AND INDUSTRIAL ENGG.          BINGHAMTON, NY-13905
>STATE UNIVERSITY OF NEW YORK,                 NEW YORK. U.S.A.
>BINGHAMTON-NY.
>
>PH:607-770-7507
>
>EMAIL:[log in to unmask]
>      [log in to unmask]
>
>URL:bingweb.binghamton.edu/~bg22842
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2