Neurocam is a LOW COST system that can detect the misregistration
between inner-layers and drilling
position while the cnc machine is drilling a small test-coupon.
It is  a REAL-TIME solution alternative to the expensive X-ray machines
and it will be a future improvement
on ml-pcbs building process. Statistical data are often not available
for new lay-up pcbs, so it 's not
possible to correct the films of the innerlayers and a real-time
solution is needed.


SOFTWARE and MANUAL available for DOWNLOAD:

http://www.ulisse.it/~marchese/neurocam/neurocam.htm

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################