Ken-

It works on a per sq. ft. basis
1 sq. ft. = 1 oz. t= 1.4 mils, usually a little less because it is
purchased by the pound.


At 12:51 PM 9/9/99 -0700, you wrote:
>Can someone throw a basic light on 1 OZ copper, how oz (weight) was attached
>to copper thickness? But 1 oz copper on what surface area.
>
>I know that 1 OZ copper = 1.4 mils
>
>re,
>ken patel
>______________________________________________________
>Ken Patel                       Phone:  (408) 490-6804
>1708 McCarthy Blvd.             Fax:    (408) 490-6859
>Milpitas, CA 95035              Beeper: (888) 769-1808
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>
Ian A. McMillan
Engineer
Herco Technology

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################