TECHNET Archives

September 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Paul Maciejewski <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 9 Sep 1999 08:54:21 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (30 lines)
HELLOOOOOOOO TECHNET!!!!!

I have an assembly question for all the assembly experts out there.
We are currently trying to bond three rigid / flex boards together  at the rigid
locations using the PTH locations.
(approx. .180 total board thickness)
One of the boards is a jumper board used to make a connection to the other two
boards (the panels are oversized).
We have tossed around the idea of using pins with high temp solder on the jumper
and low temp solder on the other locations ( approx. 100 pin locations). We have
also considered using a compliant pin to make a press fit through the jumper
board into the other board locations to make the connection.

Does anyone have any ideas with this topic. If there is anymore clarification
needed please let me know.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2