Not sure if this got through first time. If it did apologies for
repeating it. 

> ----------
> From:         Geoff Layhe
> Sent:         08 September 1999 10:10
> To:   [log in to unmask]
> Subject:      RE: [TN] Woh Nelco.............
> 
> Paul,
> I don't have information on N4000-2 but the figures usually quoted for
> Z axis expansion in FR4 laminate with a Tg of 140ºC are 150-200ppm/ºC.
> This is for a measurement range between 50-200ºC. 
> If the measurement range is below the Tg then the Z expansion is
> usually quoted as 30-40ppm/ºC.
> 
> Hope this helps.
> Geoff Layhe
> Lamar-UK
> www.lamar-uk.co.uk
> 
> ----------
> From:         PAUL BROWN[SMTP:[log in to unmask]]
> Reply To:     [log in to unmask]
> Sent:         07 September 1999 19:07
> To:   [log in to unmask]
> Subject:      [TN] Woh Nelco.............
> 
> Does anybody know the CTE Z for Nelco N4000-2, 6 or 13. I checked
> there
> website and unlike the values for x and y the z values are specified
> in
> %. if 3.5% is in fact correct would that not mean  CTE of  3500 PPM??
> Help would be great...............Paul
> 
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV
> 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at
> [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
> 
> 

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################