TECHNET Archives

September 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Enrique Lodangco <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 7 Sep 1999 20:35:16 +0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (216 lines)
Michael;

Thanks for your reply. Actually we only experienced this "gross" wicking of
epoxy on leads when they (our customer) supplied us new Lead frames from
another supplier. Apparently our customer who consigns everything had a
problem with their old L/F manufacturer so they need to source out a new
one. We still run these other type of L/F's (their old stocks) and we don't
experience such problem.

We observed that this new L/F's  are  yellowish in color and if you look at
it in the microscope it is somewhat "porous". I think this is the main
reason why the epoxy tend to creep up the leads.

Hey - thanks again.

Eric



----- Original Message -----
From: Michael Fenner <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, September 06, 1999 3:37 AM
Subject: Re: [TN] Epoxy (clear or black) wicking on leads? How to control
and and possible root causes.


> I delayed answering this one in the hope that someone out there had a
whizzbang
> answer. Here is my 1cents worth:
> The moulding compound has to wet the surface in order to adhere to it. If
the wetting
> action is too strong then there will be wicking. Wicking is normally
controlled by
> working with both the epoxy and lead frame supplier. The epoxy supplier to
ensure
> that his formulation does not contain ingredients which are known to be
mobi;le and
> therefore likely to
> wick, and the lead frame supplier to control his plating so as to give a
surface
> which is not "too active" and thus encourage wicking. The major leadframe
> suppliers/plating houses for lead frames are familiar with this, for
example from
> supplying IC houses where epoxies are used for die attach and subsequent
transfer
> moulding. This might be difficult for you in view of all the processing
your
> leadframes go through in your plant.
> A usual cause of wicking is if the surface is too clean so it might be
useful for you
> to reivew your cleaning processes as well as talk to your epoxy supplier.
Certainly
> you need to passivate the leadframe surface in some way. Sometimes just
building in a
> delay is sufficient.
> Sorry not to be more precise/factual, but wicking can be an intractable
> problem and hard to solve by much other than empirical methods. [As can be
seen from
> the other people working on it for 10 years...]
>
> Best of luck
>
> Mike Fenner
>
> BSP, OX15 4JQ, England
> T: +44 1295 722 992
> M: +44 789 999 7715
> F: +44 1295 720 937
>
> -----Original Message-----
> From: Eric Lodangco <[log in to unmask]>
> To: [log in to unmask] <[log in to unmask]>
> Date: 04 September 1999 20:04
> Subject: Re: [TN] Epoxy (clear or black) wicking on leads? How to control
and and
> possible root causes.
>
>
> Just would like to correct my item # 7 on the processes each unit will
> undergo.Curing is "2 hours" minimumn not 8 hours - sorry..
>
> Any inputs - please read my message below.
>
> >From: Enrique Lodangco <[log in to unmask]>
> >Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>,        Enrique
> >Lodangco <[log in to unmask]>
> >To: [log in to unmask]
> >Subject: [TN] Epoxy (clear or black) wicking on leads? How to control and
> >            and              possible root causes.
> >Date: Sun, 5 Sep 1999 01:49:53 +0800
> >MIME-Version: 1.0
> >From [log in to unmask] Sat Sep 04 10:49:14 1999
> >Received: from [209.42.15.76] by hotmail.com (2.1) with ESMTP id
> >MHotMailB99AA6970074D82197BAD12A0F4C88770; Sat Sep 04 10:49:14 1999
> >Received: from jefry ([209.42.15.79])by mail.ipc.org (8.8.8+Sun/8.8.8)
with
> >ESMTP id MAA01480;Sat, 4 Sep 1999 12:47:51 -0500 (CDT)
> >Received: from IPC.ORG by IPC.ORG (LISTSERV-TCP/IP release 1.8d) with
spool
> >id          2570732 for [log in to unmask]; Sat, 4 Sep 1999 12:34:20 -0500
> >Received: from mail.ipc.org (209.42.15.76:34609) by IPC.ORG (LSMTP for
> >Windows          NT v1.1b) with SMTP id <[log in to unmask]>; Sat, 4 Sep
> >1999 12:24:20          -0500
> >Received: from mail2.info.com.ph (mail2.info.com.ph [203.172.11.151]) by
> >       mail.ipc.org (8.8.8+Sun/8.8.8) with ESMTP id MAA01357 for
> ><[log in to unmask]>; Sat, 4 Sep 1999 12:34:56 -0500 (CDT)
> >Received: from ericlodangco ([203.172.28.52]) by mail2.info.com.ph
> >(8.9.1a/8.9.1) with SMTP id BAA316810 for <[log in to unmask]>; Sun, 5
> >  Sep 1999 01:37:55 +0800
> >X-Priority: 3
> >X-MSMail-Priority: Normal
> >X-Mailer: Microsoft Outlook Express 5.00.2314.1300
> >X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
> >Message-ID:  <018c01bef6fd$e85388e0$0bc5c5c5@ericlodangco>
> >Sender: TechNet <[log in to unmask]>
> >
> >Hi to all of you!
> >
> >I'm one of the new members of this forum and for a start I just would
like
> >to know more about controlling epoxy wicking (capillary effect) on IC
> >leads.
> >
> >We are currently assembling module devices (Non Volatile SRAM's) for one
of
> >our customers. Our biggest problem now is on how to control this
phenomenon
> >during encapsulation process. This customer of ours have been doing this
> >for almost 10 years but problem was not eliminated. They just recently
> >transferred these operations (consigned everything) to us together with
the
> >said problem.
> >
> >To give you a background:
> >
> >1. We manufacture these SRAM's or modules using leadframes (tin plated,
> >alloy 42 base metal) as the leads.
> >2. Major processes these units undergo - (1) Screen printing, (2)Manual
> >loading of DIPs and Lead frames onto the PCB (3) Reflow Soldering (4)
> >Aqueous Cleaning (5) Manual soldering of batteries or crystal on PCB (6)
> >Encapsulation - using part A and B epoxy (catalyst and resin) mixed and
> >dispensed on a tub (using an encapsulation machine) where the unit will
be
> >inserted  (7) then cured in the oven for a minimum of 8 hours @ 70ºC.
> >
> >IF we are to consider that there are no handling issues and machine
problem
> >-
> >a. how do we control this phenomenon?
> >b. What are the possible root causes of this phenomenon (wicking or
> >capillary effect) during encapsulation process?
> >c. How do I know if it is a material problem?
> >d. Effects of temperature and humidity on these Lead frames?
> >
> >
> >Any inputs will be highly appreciated.. Thanks.
> >
> >For your attention:
> >
> >Eric Lodangco
> >FASTECH ADVANCED ASSEMBLY
> >Philippines
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2