In a message dated 09/01/1999 6:39:47 AM Central Daylight Time,
[log in to unmask] writes:

<< To all..
         Happy Wed., especially if someone can
   help me... I have a small problem. Does anyone
   know of a manuf. of .022uf and .1 uf caps in the
   0402 package??? O.K., so its not so small a problem,
   especially since the boards are being fabricated
   and assembled this week. They will be used in Class 2
   dedicated service hardware, as oppossed to Class 1
   general products, so I need some good reliability
   types. After you stop laughting, any and all help
   will be appreciated. I really don't want to use the
   0603s on the secondary side when we spin this design
   after prototype build/test/intergration. Thanks again.

   Regards,
   Bob Vanech
   BVAN Enterprise >>

Mornin' Bob!

You might try: http://www.minicaps.com  they also make capacitor arrays
(something to consider?) One comment, I hope your board is assembled by
double-sided reflow...putting 0402's on the bottom and expecting to wave
solder them is pretty much a dream...

-Steve Gregory-

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################