Hi Techies,

I have an application that will require me to attach a .5 mm pitch, 41
position flat flex cable to a rigid PCB.  Our customer is working with a
flat flex supplier as well for the application and they told them that they
will apply the cable to the board by some type of heat plate or bar that
will process the solder and join the cable and PCB pads together or they
will insert the cable conductors into vias and solder them to the PCB.  I
don't know if anyone can help me on this, but I want to know if any of you
know anything about this type of process?   Is there equipment that I can
purchase to apply a flat flex cable to a PCB?  The cable has such a small
pitch that I'm not sure how I can insert them into vias or through holes
without causing a quality issue.  Any help would be great, if more
information is needed, let me know.

Best Regards.

Jim West
Manufacturing Engineer

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################