Gary,

Have you considered Immersion Tin?  We get quite a few comments from
satisfied customers who like the surface flatness.

Steve U.

On Thu, 2 Sep 1999 09:38:58 -0600 Gary Crowell <[log in to unmask]>
writes:
> We're doing our first board using high pincount BGA's, and I
> understand
> that we should be an immersion gold finish to get the flatness
> needed
> for BGA assembly.  My question is, how do I specify this type of
> finish
> to the fab house?  I assume thickness is one of the factors; what is
> typical and what are the considerations in thickness spec?  What
> else
> needs to be specified?
>
> The board in question is 9x14", 18 layers, a prototype build on a
> board
> that will never see high volumes (about 100 units max lifetime
> production).  Environment is labratory, internal company use only.
>
> TIA
>
> Gary Crowell
> Micron Technology
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV
> 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at
> [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################