Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 21 Sep 1999 14:56:08 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Michael,
You did not give the pitch you are using; with the dimensions you did give, I
conclude that the actual column height is about 60 mils; beware of too
slender columns. You also do not state what the Solder Column Interposer
material is; again assuming, if you solder attach a ceramic BGA to Solder
Column Interposer it is also made of ceramic. However, if it is 'a socket
type device', than I do not see the need for the solder columns. Please
provide more information.
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 904-437-8747, Fax: 904-437-8737
E-mail: [log in to unmask], Website: www.engelmaier.com
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|