Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 10 Sep 1999 09:22:13 +0900 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ken,
Same thing. A supported hole is a plated through hole.
Strict IPC-T-50 definition is, 'A hole in a printed board that has its
inside surfaces plated or otherwise reinforced.'
So, I suppose that would apply also to non plated holes fitted with eyelets
as well, although that would not be the most common understanding.
regards,
Phil
At 18:42 9/09/99 GMT, you wrote:
> Technetter,
>
> In many IPC standards, the term 'Supported hole' is often used. Could
> anyone tell me what's the difference between supported hole, and
> plated through hole? Thanks.
>
> Regards,
>
> Ken
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>
===============================================================
Phil Dutton C.I.D.
Senior CAD Technician
IPC Certified Interconnect Designer
Vision Abell Pty Ltd
Second Avenue, Technology Park,
Mawson Lakes. SOUTH AUSTRALIA 5095
Phone : (08) 8300 4400 (reception)
(08) 8300 4481 (direct)
Fax : (08) 8349 7420
email: [log in to unmask]
Internet Page: http://www.vsl.com.au
===============================================================
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|