Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 21 Sep 1999 20:23:19 EDT |
Content-Type: |
text/plain; charset="us-ascii" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
I forgot, the pin looks something like my ascii cad drawing below. It's a
compliant pin and folds down the centerline as it's pressed in. When you look
at it from the backside of the board head-on down the hole, it has a
triangular shape to it with three different contact points along the barrel...
And Rudy, your advice is well taken, but I'm only a floor-rat with good
intentions, just a cog in the machine...wish things were different, but
things are more complicated than you know...
-Steve Gregory-
_____
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
V
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|