******************************************
************   HELP!  ***********
**********************************


We are having a special ceramic smt board made. The boards are 16-up arrays that
have smt pads on both sides. Only three vias per board from side A to side B.
We have located a ceramic facility that can score the ceramic as needed, put
down the thick film Silver pattern and pull it thru the vias for conductivity.
The panels are 4.5" x 4.5" x .040" alumina.

We NEED a plater that can plate on: 50 micro inch Nickel,  then 0.008" Copper
(+/-.002), then 75 to 200 micro inches Nickel, and finally 200 to 500 micro
inches Tin.

Charlie Barker
Sr. Manufacturing Engineer
Input/Output, Inc.
281-552-3328 Voice
281-552-3100 FAX

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################