TECHNET Archives

August 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Tom Lambert <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 5 Aug 1999 08:34:50 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (20 lines)
Since there are "no dumb questions":  I need to properly designate a
Cu-Mo-Cu material specification for a board that is 0.889 inch thick.  This
would yield 35.56 increments of 0.025mm. For the IPC-CF-152/5 CICWxS
designation, should "x" be rounded to, say, 36 or left with the decimals ?
 Thank you kindly.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2