TECHNET Archives

August 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Don Vischulis <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 24 Aug 1999 16:56:47 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (31 lines)
I believe that Buehler sells a mechanical jig that allows drilling common holes which
permits mounting multiple coupons on the same set of pins.

Don Vischulis

[log in to unmask] wrote:

> LECO, BUEHLER AND STRUERS all have very good systems
> Of course for boards you will want to adapt them to your needs
>
> The one thing lacking in all is the ability to drill alignment holes
> to mount more than one sample at a time.  If you can get your
> board shop to drill the holes during non-plated through hole operations
> you willhave an ideal situation.
>
> We have an Excellon Unidrill to drill the holes since we get so many

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2