Contact Dave Judah at Merix Corp. in Forest Grove, OR      # (503)359-2601.
Good luck,

Ahne Oosterhof
A-Laser, Inc.
(503)641-9428


-----Original Message-----
From:   TechNet [mailto:[log in to unmask]] On Behalf Of Jim Kittel
Sent:   Monday, August 23, 1999 14:50 PM
To:     [log in to unmask]
Subject:        [TN] Micro VIA's

Fellow TechNetters,

We are are moving into the assembly/design of circuit card assemblies using
micro via technology and I need a lead on some PWB vendors that can
fabricate boards with buried or blind micro vias.  These designs will
require vias in the 0.004 to 0.008 inch diameter range with 0.004 inch trace
widths.  I would like to find a supplier that can do the entire process in
house.  The finish will be nickle/immersion gold, typically FR-4 or
polyimide and we are talking small order sizes.

Any ideas on who to contact?

Jim Kittel

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################