If you want an extremely good etch which wiil remove tin lead solder and
copper try a mixture of 20% nitric acid (ie 33.3 % of 60 % nitric acid)with
up to 50 g/lt ferric nitrate
It also works well as a jig stripper
Beware of overloading it because of exotherm
[log in to unmask]
----- Original Message -----
From: nishath yasmeen <[log in to unmask]>
To: <[log in to unmask]>
Sent: 19 August 1999 15:07
Subject: [TN] Etchant for SnPb solder
> Hello Everyone!
> What is a good etchant for SnPb (60/40) Solder?
> Thanks,
> Yasmeen
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################