This is interesting . We too have started ( only recently ) to see this
condition on our double treat foil. We have found that it has only occurred
on Gould foil. This condition causes serious issues at AOI.   In addition,
this condition has corresponded with a notable change in the appearance of
the treatment. We have recently noticed that the double treat material has
been coming in two toned and in some cases much darker overall.  We have
found the breakdown of the edges has been limited to the discolored double
treat.  so far anyway..........

Please contact me off line for our solution to the problem as it is related
to a specific supplier requirement.

Ed Cosper
Director Quality Assurance and Engineering
American Board Company


-----Original Message-----
From: Anne Ledger <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Tuesday, August 17, 1999 9:19 AM
Subject: [TN] Innerlayer issue


>Good Morning Technetters,
>
>I have a question for board fabbers.  Problem:  We are experiencing
>weave texture on our innerlayer material.  I have spoken to the
>manufacturer who states that weave does shift in the "pour" of the
>material (when the resin is added) and that there is no specification
>that controls the depth requirement of the weave.  The topography is
>visual prior to lam/image.  The condition is causing our resist to lift
>slightly and allows an etch stain on the double treat foil that so far
>we can not remove.  Question:  Is this a typical condition of innerlayer
>material (other manufacturers)?  Is it double treat foil only?  Is there
>a way to remove this type of etch stain?  What is the acceptablity of
>stain on inner layer foil?  I can't find any reference info in IPC.
>
>Any and all input would be appreciated.
>
>Anne Ledger
>EMDS, Inc.
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################