I have found that the most common gold plating resist is Morton GA.  However
this resist is very old, and I'm sure some of the new resists such
Platemaster, or Proplate work very well.  Morton used to have MX which also
worked well, but it was horrible to strip, so I believe they discontinued it.

Are these panel using only the gold as the etch resist, or is it gold and
tin/lead as the etch resist?  The are significant problems, and difficulties
associated with this type of board.

Scott

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################