TECHNET Archives

August 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Defect Count
From:
Grant Emandien <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 24 Aug 1999 08:14:56 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (89 lines) 
Hi,

Surely it depends on the nature of the defects and the scope of the analysis
i.e. if the assembled board is part a system then it could be classified as
a defective board (one defect). If it is only the PCB then again it is one
defect.  However, if you refer to an assembled board after various processes
have contributed to the defects then they should be classified as being
process specific hence 1, 2, or 3 defects.

Regards
Grant

-----Original Message-----
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Tuesday, August 24, 1999 3:49 AM
To: [log in to unmask]
Subject: Re: [TN] Defect Count


Hi Dave,

You should count 1 defect (Major/Critical) instead of 3 though there are 3
defects on same board.

Regards,
OH Yeoh
-----Original Message-----
From: Dave Roesler [mailto:[log in to unmask]]
Sent: Tuesday, August 24, 1999 9:50 AM
To: [log in to unmask]
Subject: [TN] Defect Count


Technetter's,

When reporting defects, do I count all defects individually or do I count
the number of bad circuits.  For example, if I have a circuit which
contains 3 defects, do I count this as 3 (for the 3 defects) or 1 (for the
single, bad circuit).

Thanks in advance for the clarification.

Dave Roesler
TRI-C Design, Inc.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2