Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 16 Aug 1999 17:08:39 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Since the two replies I received were from people using ultrasonic cleaners
I'm starting to think it's my cleaner with the problem more than the
printer. The wiper/vacuum system on the printer seems to work quite well.
Of course, we can't afford to replace the cleaner we have...
Thanks for the feedback.
> -----Original Message-----
> From: Lambert, Katherine A. [SMTP:[log in to unmask]]
> Sent: Monday, August 16, 1999 4:12 PM
> To: [log in to unmask]
> Subject: Re: [TN] Solder paste stencils
>
> We haven't had a problem with paste on the back of the stencil. You may
> want to investigate your stencil printer to see why it isn't performing
> properly. We have an ultrasonic stencil cleaner that seems to clean
> solder
> off stencils very easily with a 2 minute cycle.
>
> Kathie Lambert
> Process Engineer
> Northrop Grumman
> Baltimore, MD
>
> -----Original Message-----
> From: Martin, Jesse [SMTP:[log in to unmask]]
> Sent: Monday, August 16, 1999 3:08 PM
> To: [log in to unmask]
> Subject: [TN] Solder paste stencils
>
> Has anyone had a problem with solder paste stencils that have a
> build up of solder paste on the bottom (PCB) side of the stencil that
> won't
> come off in the stencil cleaner? I think what happens is the vacuum/paper
> wiper leaves some on the bottom after each wipe and the more it wipes the
> harder it is to get off. I can pop it off with an Xacto knife or the like
> but is very time consuming. Only other thing that works is using a
> Scotchbrite pad but that leaves a lot of scratches (which probably causes
> faster build up). Have also tried stainless steel cleaner with no luck. We
> use an old Austin American batch aqueous cleaner with saponifier at 120
> degrees F. Any and all ideas welcome.
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV
> 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at
> [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|