001 refers to ANSI/ J-STD-001.  It is available from IPC.

> -----Original Message-----
> From: Hughes, Kathy (Cary) [SMTP:[log in to unmask]]
> Sent: Tuesday, July 13, 1999 12:41 PM
> To:   [log in to unmask]
> Subject:      [TN] "allowable number of repair/rework defects."
>
>         Hi there!
> > My name is Kathy Hughes.  I am a manufacturing engineer with Borg
> > Warner Automotive.  The line I am responsible for is a PCB SMT assembly
> > line.  Presently, we are trying to find out if there is a standard (IPC or
> > general) that states the amount of rework allowed to be performed on a PCB
> > -
> > or per square inch or something to that matter.  If you have any
> > information
> > that could help me get to this industry standard, I would greatly
> > appreciate
> > it.  I just found this quote from you on the IPC Technet archives from
> > about 4
> > years ago!
> > "Either spec can be used when invoked by customer or contractual
> > agreement.
> > A-610 may be used as a standalone document for inspection, but keep in
> > mind
> > that it doesn't specify the frequency of in-process or end-product
> > inspection, nor the allowable number of repair/rework defects. These are
> > found in -001."
> > To sum that up, is that IPC A-001??  How can I find a copy of this, or
> > just
> > find out the
> > "allowable number of repair/rework defects."
> > Thanks a lot for your help!  I really appreciate it!
> > Sincerely,
> > Kathleen Hughes
> >
> >
> > ____________________________________________________
> >
> > Kathy Hughes
> > Borg Warner Automotive
> > Manufacturing Engineer
> > 406 Gregson Drive
> > Cary, NC 27511
> > Phone: (919)469-6152
> > Fax: (919)469-2911
> > Email:  [log in to unmask]
> >
> > ____________________________________________________
> >
> >