We presently have a design in production consisting of a 625 (1.27 mm 25 x
25)ceramic BGA which emits 7 watts. The outer four rows of the array are
signal terminations while the internal array of 17 x 17 solder joints are
thermal dissipaters. The top layer of the thermal area under the component
consists of a solid copper layer with pads defined by solder mask. Vias
attached to this thermal pad go all the way through the board to a heat sink
which the board is mounted to.
If you would like to discuss this further, please let me know.
Jim Marsico
AIL Systems Inc.
(516) 595-5879
[log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################