TECHNET Archives

June 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
David Schaefer <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 27 May 1999 13:49:11 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (37 lines)
Can anyone provide some information on the questions listed below:

1. - Are there any specifications (IPC or other) which should be referenced
in the PCB fabrication
      drawing for NiAu finishing?

2. - At what point during fabrication is NiAu normally applied - before or
after LPI soldermask (or both)?
      If both, what are pros / cons of each?  Is it important to outline
desired Fab processing in the
      fabrication drawing?

3. - What sources of NiAu info are available on the web?


Thanks,

Dave Schaefer
PWB Design Technical Lead
NORTEL Broadband Wireless Access
14 Fultz Boulevard
Winnipeg, MB   R3Y 1V3

Phone:      (204)631-2298    ESN 771

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2