TECHNET Archives

June 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Plated Through-Hole
From:
Jon Moore <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Sat, 12 Jun 1999 19:39:42 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
In a message dated 5/25/99 5:24:10 AM US Eastern Standard Time,
[log in to unmask] writes:

<< I'll get straight to the point - you see, a product of my company has a
 plated through-hole that must not be soldered.
 The past solution was to cover the whole thing with a kapton tape before
 running it through the wave. Now we have suggestions of using a plug or
 water-soluble masking tape. >>
I have found liquid  solder masks, either peelable or water-soluble, to be
the best approach.

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2