Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 7 Jun 1999 15:48:01 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In a message dated 06/07/1999 12:39:28 PM US Eastern Standard Time,
[log in to unmask] writes:
> Jason,
> Both of the following 2 sources are on TechNet (and located in the Midwest)
> and I have used both over the years for different types of analyses:
> Robisan Laboratories : [log in to unmask]
> Contamination Studies Laboratory : [log in to unmask] or
> [log in to unmask]
> Typically, they will provide the coupons cleaned to a cleanliness level and
> sealed in individual bags prior to receipt.
> Good luck.
>
> Steve Sauer
Thanks for the pitch Steve. Our lab does carry the IPC-B-24 (copper and
HASL, FR-4 and polyimide), the IPC-B-36 (bare copper and HASL, FR-4 and
polyimide), the IPC Phoenix board (bare copper, FR-4) and the IPC-B-25A
(FR-4, bare copper only). We do NOT carry the IPC-B-25 board as that board
was made obsolete by the B-25A.
Our test boards are made for us by Diversified Systems (DSI) in Indianapolis
and have a pretty good (clean) process. We order by the 100s and so get a
volume discount on their standard 4 week turnaround price. This helps out
the testers who don't want to take the hit on ordering small volumes, but if
you are willing to wait and are ordering a large number of boards, it is
cheaper to get the boards direct from DSI.
Doug Pauls
CSL
[log in to unmask]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|