TECHNET Archives

June 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"McMonagle, Michael R." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum." <[log in to unmask]>, "McMonagle, Michael R." <[log in to unmask]>
Date:
Thu, 3 Jun 1999 08:42:09 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (88 lines)
Jim,
        I guess you'll get your $6Ks worth, but why? Unless the feeders
as delivered suit your needs, you'll end up spending lots more to get
additional feeders (if you can find them). I would be wary of the 0603
claim, I have worked with a MPS318 (back in the '80s when they were new)
and never had much success with anything under 0805. In addition, the
machine uses mechanical centering jaws and hard metal nozzles, which
will crack resistors and caps if not kept adjusted correctly. You could
be just buying a bunch of headaches.

        What is your end use requirements and price range? There are
lots of other systems on the aftermarket that might serve your needs
better than this.

Mike McMonagle
PCA Process Engineering Supervisor
K*Tec Electronics
1111 Gillingham Lane
Sugar Land, TX  77478
(281) 243-5639 Phone
(281) 243-5539 Fax
[log in to unmask]

> -----Original Message-----
> From: West, Jim [SMTP:[log in to unmask]]
> Sent: Wednesday, June 02, 1999 4:20 PM
> To:   [log in to unmask]
> Subject:      [TN] Purchasing a Dynapert 318HR with 60 way feeder.
>
> Hi everyone,
>
> I'm in negotiations with an individual concerning the above machine.
> Does
> anyone have any experience with this particular machine? It was built
> in
> 1989 and he is asking $6000.00 for the machine that includes 10
> nozzles,
> 10-8mm feeders, 2-12mm feeders, 1- SOIC belt feeder.  He states that
> it will
> place all the way down to 0603 and it will do some fine pitch.  If
> anyone
> has any recommendations or comments about the machine and price, I'd
> really
> appreciate your help.
>
> Thanks
>
> Jim West
> Manufacturing Engineer
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2