TECHNET Archives

June 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Collins, Graham" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum." <[log in to unmask]>, "Collins, Graham" <[log in to unmask]>
Date:
Thu, 10 Jun 1999 08:04:43 -0300
Content-Type:
text/plain
Parts/Attachments:
text/plain (56 lines)
Rudolph
Try KJ Marketing, I have an ad from them about an "inspection overlay" that
sounds like what you are looking for.
http://www.kjmarketing.com/PRODUCF.HTM
<http://www.kjmarketing.com/PRODUCF.HTM>

Similar to the transparent "kepoch" stencils they make, they will put
cut-outs wherever you should have a part - so you drop it over the board and
look for empty holes...

Haven't tried one, so I can't advise as to it's success but it sounds like a
good plan.

regards,

Graham Collins
Process Engineer,
Litton Systems Canada, Atlantic Facility
(902) 873-2000 ext 6215


-----Original Message-----
From: Yu, Rudolph [mailto:[log in to unmask]]
Sent: Wednesday, June 09, 1999 8:27 PM
To: [log in to unmask]
Subject: [TN] Conductive Transparency



Can anyone tell me if there is any ESD/Conductive transparencies in the
Market currently? I am thinking to use it for the first article inspection
on the high count passive components.  Any ideas?  Thanks.

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2