This may be a repeat
In a message dated 26/05/99 20:44:01 GMT Daylight Time, [log in to unmask]
writes:
> In general, what does the industry do to test conformal coatings for
> compatability over a noclean flux? I am attempting to look at conformal
> coatings and want to know what test parameters to set up and a general
> direction
> for coating the Alpha NR310 wave soldering flux. Anyone know what works
> well
> over NR310? What are my concerns to test for and recommended test methods?
>
> Jason Smith
> Process Materials Engineer
Suggest you might want to contact Concoat here in UK as they have done big
programme with our National Physical LAboratory in this area.
Mike Fenner
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################