TECHNET Archives

May 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Plated Through-Hole
From:
Kat Lee <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 25 May 1999 05:50:05 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (27 lines) 
Hello everybody,
This is my first time mailing to the list.

I'll get straight to the point - you see, a product of my company has a
plated through-hole that must not be soldered.
The past solution was to cover the whole thing with a kapton tape before
running it through the wave. Now we have suggestions of using a plug or
water-soluble masking tape.
I was wondering if any of you have any experience in this matter and could
share anything with me.

Thanks in advance.

Kat LEE

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2