TECHNET Archives

May 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Assembly Standards
From:
Darrel Therriault <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 5 May 1999 11:31:18 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines) 
Richard,

I have an old set of the Martin Marietta Workmanship Standards, copyright
1988, so I'm not
sure if this is the most current set (4 manuals).

The address I have is :

        Martin Marietta
        Electronic Systems
        POBox 555837 MP-510
        Orlando, FL 32855-5837

Hope that helps.

DT





At 11:00 AM 5/5/99 -0700, you wrote:
>Hello all again,
>
>I am interested in what people are using for assembly standards other than
>the 610B. The 610B does a good job addressing the board, but I am interested
>in beyond the board. Of course if you are using something other or in
>addition to the 610B, I would listen with an open ear.
>
>We used to have a book from Martin Merrietta that covered a lot of good
>ground, but we have lost any contact or sourcing information for that.
>
>Thanks in advance for the information.
>
>Richard Hamilton
>Clemar Mfg. / Rain Bird
>[log in to unmask]
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2