TECHNET Archives

May 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
PCB assembly checking tool.
From:
Ken Fong <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 17 May 1999 14:36:06 +0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (42 lines) 
     Folks,

     We are designing PCB using CAD systems such as Computer Vision and
     Cadence. We have dozens of manufacturability rules already fed in the
     systems to check for easier shop floor production. Any deviations from
     the rules will be reported after the PCB layout completes. However,
     there're always some rules that cannot be checked by the systems, e.g.
     the spacing between components will be different when the sequence of
     the component assembly is different, and 3 dimensional component
     spacing concern. So would like to know if there is some tools to
     enable those production concerns be automatically 'rehearsed' before
     issue of the PCB design.

     Appreciate any feedback.

     Regards,
     KenF, May17,99.
     email:[log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2