Dale,

One other thing you might do is go to the NIST Web Clock site,
http://www.bldrdoc.gov/timefreq/javaclck.htm, and download their time
setting program. It can be used to compare your computer's clock to NIST's
Atomic clock and, if you want, synchronize your time to their time.

Charlie B.




Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
      to Robert Peterson <[log in to unmask]>



 To:      [log in to unmask]

 cc:      (bcc: Charles Barker/US/I-O INC)



 Subject: Re: [TN] Date & Time Stamping on records









To sync computers to each other, at startup I run the following command

net time \\"server name" /set /yes

(server name being the name of the computer you want to pull the time
from, not in quotes)

Now I only need to set the time on one computer.
This works on a Microsoft network.


Robert Peterson
mailto:[log in to unmask]

Alternate Final Finishes, Inc.
166 Middlesex St.
N. Chelmsford MA 01863
Phone (978) 251-7429     Fax (978) 251-7219
http://www.AlternateFinalFinishes.com


-----Original Message-----
From: Dale Marcum [mailto:[log in to unmask]]
Sent: Thursday, May 13, 1999 1:50 PM
To: [log in to unmask]
Subject: [TN] Date & Time Stamping on records


I am currently running the core of an Access database on a server. All
the
other computers open up the input screen and input data. However my
problem
is that some computers loose track of the correct time and or date when
the
computer is shut down, thus entering data into the system with the wrong
Date and Time Stamp.

What can I do to reset the other computers date and time to that of the
server computer?
Thanks in advance for your advice.

Dale Marcum
Quality Engineer
QUALITY ENGINEER
Direct:(770) 414-8188 x273
Fax: (770) 414-1801
Internet:[log in to unmask] <mailto:[log in to unmask]>

American Megatrends, Inc.
CO: Vitel Technologies, Inc.
5243 Royal Woods Parkway, Suite 200
Tucker, GA 30084

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################