Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 13 May 1999 20:39:08 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Mike,
I have experience with both Thermount® and PTFE (Teflon®) substrate material
in PWBs.
Thermount is an aramid reinforcement combined with a thermoset resin matrix
such as epoxy. The x,y CTE values are in the range of 14-18 ppm/C° driven by
the aramid structure. The z-axis radial expansion of the aramid fiber is 60
ppm/C°. The particular resin system selected will also drive the z-axis
value upward at its glass transition temperature. So for the aramid case the
substrate will expand during processing where the glass transition
temperature is approached or exceeded. In addition, the moisture absorption
of the raw aramid fiber is in the range of 3-4% but in the cured resin
matrix, it is less.
For the PTFE case, the substrate is a thermoplastic subject to pressure flow
(but restrained somewhat by the glass or other reinforcement that might in
the substrate), therefore this substrate with expand or grow in the x,y
direction. The moisture absorption of the PTFE is insignificant.
Hope this helps
Lyle Wallig
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|