Sender: |
|
X-To: |
|
Date: |
Fri, 7 May 1999 18:30:59 -0700 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
-----Original Message-----
From: Jack Olson <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Friday, May 07, 1999 12:31 PM
Subject: [TN] Unconnected inner-layer pads
>It seems that most fabrication vendors prefer to remove the unconnected
pads
>from inner-layers, in fact we do it for them before we send out the
gerbers.
>
>But I thought I overheard Gary Ferrari say there was some test results
that
>showed the board to be more reliable with all pads included, but I
don't
>know where to find it or who did the testing.
>
>Does anyone know if it is significant enough to re-evaluate our
process?
>
>Jack
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
If this is a concern (>8 layers, epoxy under 150Tg) leave the pads on
the first innerlayer in from both sides. This will help until you need a
higher Tg.
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|